| |
3mm Society 14.2 gauge flexible track
1 yard £6.00
5 yards £30
50 yards £287
TRACK GAUGES
Now available stainless steel NMRA style
track gauges. All take code 60 BH
and code 80 FB unless stated.
12mm
gauge finescale
£3.50
12mm
gauge finescale (code 75 BH only)
£4.00
13.5mm
gauge finescale
£4.00
14.125mm
gauge finescale
£3.50
15.75mm
gauge finescale
£4.00
also supports 9mm dual gauge but cannot be used as three-point gauge for 9mm
gauge
21.0625mm
gauge finescale
£4.50
also supports 14.125 dual gauge but cannot be used as three-point gauge
for 14.125 mm gauge
For those people who do not know what these are artists
impressions on these are shown below.
The basic gauge.
The gauge being used to set the track gauge.
The gauge being used to set the check rail gauge.
The gauge being used to gauge the flangeway clearance.
Three gauges mounted on a threaded rod (not shown in detail)
being used as a three point gauge on a curve.
If you are interested in these gauges please email your
intent to fands@finneys.org.uk
indicating the gauge, standards and rail section your are interested together
with the quantity of gauges required. This will allow us to estimate our
production quantities more accurately.
STAINLESS
STEEL THREEPOINT GAUGE 12mm and 14.125mm gauge use
on curved track to hold rail, and get correct gauge widening.
£16.50
STAINLESS
STEEL NONE ROLLER GAUGE
14.125 gauge
use
to hold straight rail firmly when making plain track or pointwork.
Has slots for both running rails and check rails.
£7.50
MINT GAUGE
This is a new Track Gauge
originally developed to assist
in maintaining
the gauge
through the switch blades whilst construction is in progress,
The gauge has no legs with which to grip the
rail head, it simply sits on top. The
two lugs are positioned to be a sliding fit in the track and through the minimum
flangeway. It
acts in the same way as the three legged gauge
to give gauge widening, irrespective of
which way round it is.
It has been found that the
gauge can be slid through any piece of track either plain or point and crossing.
If the gauge of the track is correct it will slide along sweetly,
under gauge will cause it to jam whilst over
gauge will allow it to move from side to side. It will check that the flangeway
widths are not too narrow, whilst
removing
the gauge
from the rails and inserting only
one lug,
will
check if the
flangeway is too wide.
It
will find the vertically or horizontally misaligned rail joints as well as the
misalignment of Vee
and wing rail.
A
versatile gauge to complement the three legged and NMRA style rail gauges you
already have.
£12.50
POINT
BLADE FILING JIG – does A B C & D switches
£15.00
TRACKSETTA 12mm
gauge (TT3, H0m & 00n3)
Templates for setting flexible track to a consistent curve/straight.
The fit between the rails. For use with 12mm gauge track (Peco H0m or 3mm
Society). Available in the following radii:
9in, 12in, 15in, 18in, 24in, 30in and straight (8in long). £5.00
each
    |
