|
"The Combo Right Clamp" - A Unique Design
"The
Combo Right Clamp" has
all the features of our other Right Clamps and holds flat materials square to
each other for gluing or other tasks. The difference lies in the numerous
customer requested extra features now standard on the Combo Right Clamp.
Thank
you for your interest in "The
Combo Right Clamp" and
we wish you Happy Modeling.
Sincerely,
Randy & Lynn Coffman
| Model Number |
AC-7-1 |
| Jaw Length |
2.75" (70mm) |
| Overall Length |
4.75" (120mm) |
| Base Width |
0.75" (19mm) |
| Jaw Max Open |
3/8" (10mm) |
| Weight Each |
2.8oz (79g) |
| Price Each |
£30.95 |
Soldering
Weather you use a Soldering Iron, Soldering Gun, Soldering Station, Resistance
Unit or Torch, the Hi Temperature Silicone Rubber clamping pads make the
"Combo Right Clamp" perfect for the task.
 
Heavier
1/8" Base Angle
Heavier 1/8" aluminum Base Angle material provides good heat sink
protection.
 
Vice
Tab Extension
The Vice Tab Extension allows the "Combo Right Clamp" to be
securely held in a vice in almost any position. "Hands Free" access to
your project is important anytime, but especially so during soldering
operations.
  
Mini
Alignment Grooves
Customer requests for ways of holding wire, like handrails, resulted in custom
clamps with Mini Alignment Grooves. These grooves near end of Base Angle are for
holding small wire or other materials at 90°.
 
Medium
Alignment Grooves
Additional Medium Alignment Grooves in Base Angle, at the first Access Hole, are
for securely holding various round and some structural shape materials at 90°.
  
End
Notch
The End Notch is an open ended Access Hole at the very end of the Base Angle of
the "Combo Right Clamp". The End Notch offers many new useful
functions by providing full access to the corner joint of a variety of
structural shapes.
 
 
Axial
Relief Notches
On occasion our customers have needed extra room at the inside corner of parts
to be joined. The Axial Relief Notches run the length of the "Combo Right
Clamp" at the outside corner of Base Angle to provide this extra
clearance.
 
End
Screw Thumb Nuts
We are especially proud of the notes we get telling us how our tool(s) allow
them to continue to model when they might not otherwise be able to do so. As
fingers get older, easy things become more difficult. The addition of locking
nuts as End Screw Thumb Nuts allows easier adjustment of the Clamping Tube
position for different part thicknesses.
 
The Right Clamp" - A Unique Design
"The Right Clamp"
is designed to hold flat materials square to each other for gluing or other
tasks. The inner surface of the parts to be held need to be flat and smooth for
the tool to work as designed.
Soldering metal parts can be accomplished by turning the clamping tubes over and
adding Teflon tape as an insulator.
Thank you for your interest in "The Right
Clamp" and we wish you
Happy Modelling.
Sincerely,
Randy & Lynn Coffman
This Great 90° Clamp is indispensable in
many modelling applications. The Access Hole allows glue to be placed at
inside corner.
|
 |
Rubber Clamping Pads are friendly to
detail on outer surfaces. Compact, Light Weight, Metal construction is
strong without causing stress to parts.
|
 |
End Screws adjust clamping tube position
to match material thickness. Efficient Clamp Design holds gently but
firmly. Open Clamp Configuration allows for assembly of "T"
section shapes.
|
 |
Flexible design is of great assistance
where versatility is required. Thumb Nuts allow precise control of clamp
pressure for adjusting parts and holding power.
|
 |
The following is "The Right Clamp"
guideline, but as with any tool, they should be matched to the size of the job.
You should choose which Right Clamps to order by comparing the parts to be
assembled to the jaw length of the clamps. Larger clamps can be used for smaller
jobs within reason. Two smaller clamps, one at each end, can be used instead of
one larger clamp.
"The Right Clamp" - Specifications
The following is "The Right Clamp"
guideline, but as with any tool, they should be matched to the size of the job.
You should choose which Right Clamps to order by comparing the parts to be
assembled to the jaw length of the clamps. Larger clamps can be used for smaller
jobs within reason. Two smaller clamps, one at each end, can be used instead of
one larger clamp.
This is the smallest clamp and has a jaw length of 1" or 25mm.
| Model |
AC-2-2 |
|
| Jaw Length: |
1" (25mm) |
|
| Length: |
1.92"(49mm) |
|
| Base Angle: |
0.4" (10mm) |
|
| Max Open: |
5/16" (8mm) |
|
| Weight Each: |
0.86oz (24g) |
|
| Price Each: |
£18.60 |
|
This is our most popular size and has a jaw length of 1.5" or 38mm.
| Model |
AC-1-1 |
|
| Jaw Length: |
1.5" (38mm) |
|
| Length: |
2.09"(74mm) |
|
| Base Angle: |
0.5" (13mm) |
|
| Max Open: |
5/16" (8mm) |
|
| Weight Each: |
1.63oz (46g) |
|
| Price Each: |
£19.40 |
|
This clamp has a jaw length of 2.75" or 70mm.
| Model |
AC-3-2 |
|
| Jaw Length: |
2.75" (70mm) |
|
| Length: |
4.17" (106mm) |
|
| Base Angle: |
0.5" (13mm) |
|
| Max Open: |
5/16" (8mm) |
|
| Weight Each: |
1.9oz (54g) |
|
| Price Each: |
£20.25 |
|
This clamp has a jaw length of 2.75" or 70mm. It is similar to the
"The Long Right Clamp" but has longer screws and a larger
base angle.
| Model |
AC-4-2 |
|
| Jaw Length: |
2.75" (70mm) |
|
| Length: |
4.17" (106mm) |
|
| Base Angle: |
0.75" (19mm) |
|
| Max Open: |
5/8" (16mm) |
|
| Weight Each: |
2.18oz (62g) |
|
| Price Each: |
£21.05 |
|
This clamp has a jaw length of 7" or 178mm. As with the 4
Inch clamp, the larger size of this clamp can make it very
useful in many hobby fields including Doll House and Woodworking
projects. |
|
Model
|
AC-6-1 |
| Jaw Length: |
7" (178mm) |
| Length: |
9.84" (250mm) |
| Base Angle: |
0.75" (19mm) |
| Max Open: |
5/8" (16mm) |
| Weight Each: |
6.7oz (188g) |
| Price Each: |
£31.80 |
|
|
"The Original Splice Clamp"
Our first size of this design series has a jaw length of 1.5" or
38mm and is handy for many situations where parts need to be bonded edge
to edge or end to end.
|
"The Original Splice Clamp" AC-21-1 with HO Micro Engineering
girder. |
|
"The Long Splice Clamp"
|
"The Long Splice Clamp" AC-22-1 with wood frame. |
|
"The 4 Inch Splice Clamp"
|
"The Original Splice Clamp" AC-23-1 with HO Trestle
parts. |
|
"The 7in Splice Clamp
AC-24-1 7 INCH
(7 x 0.5 Jaw x
5/8)
£39.10 each
|
|
   
| 
